Marley New Zealand
The pre-fitted thermal bonded Polypropylene (PP) filter sock prevents the excess fines in the water from entering the pipeline and ...More
|
Marley New Zealand
Road Drain, Heavy Wall Drainflo, is made from High-Density Polyethylene (HDPE) material, with a corrugated profile but with greater wall ...More
|
Marley New Zealand
Draincoil can be used where root penetration is a problem, for example when the drain passes under or near trees ...More
|
Marley New Zealand
Drainflo is manufactured from High-Density Polyethylene (HDPE) material, with a corrugated profile wall to give high crush resistance, flexibility and ...More
|
Marley New Zealand
Manufactured from Unplasticised PVC (U-PVC)with pressure ratings PN6/PN9/PN12/PN15. Sizing ranges from 15DN up to 375DN. Pipes in ...More
|
Marley New Zealand
Manufactured from Unplasticised PVC (U-PVC) with pressure ratings PN12/PN16/PN18. Sizing ranges from 100DN up to 300DN Pipes in ...More
|
Marley New Zealand
Manufactured from Modified PVC (M-PVC) with pressure ratings PN12/PN16. Sizing ranges from 100DN up to 300DN Pipes in ...More
|
Marley New Zealand
Manufactured from Modified PVC (M-PVC) with pressure ratings PN9/PN12/PN15. Sizing ranges from 100DN up to 375DN Pipes in ...More
|
Marley New Zealand
Developed to eliminate problems of stormwater infiltration into the wastewater network and provide a cost effective, safe point of access ...More
|
Marley New Zealand
Used to remove solids from waste water preventing them from entering the infrastructure. ...More
|
Marley New Zealand
Used when the Drain, Waste and Vent (DWV) pipe has been broken off at or below slab level, and the ...More
|
Marley New Zealand
A simple and effective way to eliminate flood risk by backflow through drainage channels. New Zealand Building Code require provision ...More
|
Marley New Zealand
Manufactured from Polypropylene (PP), the Poliphon system uses multi-layer material technology to provide soundproof quality that reduces noise levels to ...More
|
Marley New Zealand
Marley Stormline solid wall pipe is manufactured from Uplasticised PVC (U-PVC). Range is available with solvent joint or rubber ring ...More
|
Marley New Zealand
Marley Optim, U-PVC (32DN up to 375DN) and Marley Impact, M-PVC (100DN up to 375DN) are both available from SN4 ...More
|
Marley New Zealand
Recommended procedure to join two ends with a rubber ring joint or with solvent cement. ...More
|
Marley New Zealand
A specifically designed stack system for high-rise buildings. Manufactured from High Density Polyethylene (HDPE), the Akatherm Akavent reduces the number ...More
|
Marley New Zealand
The complete electrofusion solution for safe jointing techniques. Ideal for water, gas and industrial piplines made of Polyethylene (PE). ...More
|
Marley New Zealand
Designed to provide superior fitting grip across the Marley Polyethylene (PE) pressure range. Easy to use with slide and tighten ...More
|
Marley New Zealand
Manufactured from PE80b and PE100, Marley pressure pipe can be used for a range of applications from carrying water, gas, ...More
|
Marley New Zealand
The access pit range is designed both as a stormwater collection pit and an access point to clear obstructions in ...More
|
Marley New Zealand
The 200mm Channel and Grate is designed as a high capacity system around the home and garden. A range of ...More
|
Marley New Zealand
The 130mm Channel and Grate system has 1.5 tonne wheel loading makes is ideal for use in home driveways, garage ...More
|
Marley New Zealand
The shallow channel has an overall depth of 60mm which is an ideal solution where there are minimum depth requirements. ...More
|