The range of Commercial Windows & Doors will complement any of the Commercial Façade or Curtain Wall Façade Suite options. They are easily integrated into the suite from a fabrication and installation perspective while also continuing the consistent ‘Commercial’ look and feel.
Features and Benefits
Our expansive range of Commercial Windows and Doors utilise Italian designed high performance EPDM (ethylene propylene diene monomer) rubber to seal every joint where air and water leakage could occur.
These seals have been tested for water penetration resistance at wind speeds of approximately 145km/h, triple the performance of normal seals.
Glazing Options
The minimum glass thickness required is 4mm for single glazing and the maximum double-glazing unit is 28mm.
Testing
The Commercial Series has been tested and complies with NZS 4211 and AS 2047. This compliance is the result of thorough testing, quality design and strict quality control in manufacturing. Test Certificates are available upon request.
Design Loads
The Commercial Series achieves the relevant standards serviceability wind pressure, ultimate wind pressure and water pressure requirements.
Residential Series Windows and Doors
Finishes:
Powder Coating
Powder coating is available in a large range of colours. For standard residential applications this is applied to a minimum 60 micron thickness but can be increased up to 80 microns for more unforgiving environments.
There is a standard D1010 warranty of the Top 40 Standard Colours. This provides a 10-year warranty on colour integrity and a 10-year warranty on film integrity for use in residential, commercial, high-rise and marine environments.
Further warrantees are available dependent on colour and the specific environmental conditions and performance requirements.
Anodising
Anodising is available in silver, bronze and black. The quality and longevity of the anodise finish is dependent on the thickness of the oxide layer. The standard is 12 micron with 20 micron and 25 micron also available for commercial or marine environments.
NEW Mist Anodising
Mist Anodising is available in silver, bronze and black. The quality and longevity of the anodise finish is dependent on the thickness of the oxide layer. The standard is 12 micron with 20 micron and 25 micron also available for commercial or marine environments.
EXCLUSIVE Eurocote
Eurocote is a heat bonde wood grain coating that not only looks and feels like the real thing but is durable and easy to maintain. Eurocote provides a wide range of colour choice oppertunities.
Manufacturers:
- Elite Windows & Doors www.elitewindows.co.nz
- Fairview Windows & Doors www.fairviewwindows.co.nz
read more