An adjustable polypropylene support for tiles, paving slabs, natural stone or Hardwood Timber Panels above waterproofing membranes on decks, roofs and other pedestrian areas.
- Suitable for all membrane types.
- The base of the Deck Jak® is designed to spread the intended load without damage to the membrane, No adhesion to the membrane is required.
- The tile bearing area on the top of Deck Jak® has been tested and meets with the strength required by NZS 4203.
- Adjustment is done by turning the bottom half of the Deck Jak® Tile Support. There is no requirement to remove the tile.
Material:
Polypropylene
Colour:
Black
Diameters:
105mm - Deck Jak® Diameter
110mm - Deck Jak® Spacer Diameter
(NOW IN STOCK 200mm diameter base that can be placed under the Deck Jak® Tile Support or the Deck Jak® Spacer) This provides a larger footprint for acoustic membrane components.
Minimum Height:
65mm (Deck Jak® standard)
20mm (Cut Down - Additional charges apply)
Maximum Height:
105mm (Deck Jak® standard)
400mm+ (Deck Jak® and Deck Jak® Spacers combined)
Fin Width:
3mm - Narrow Fin
8mm - Wide Fin (For use with Tile-on-Compressed-Sheet only)
Deck Jak® Spacer Height:
20mm & 50mm (Combinations of these are able to be stacked under the Deck Jak® Tile Supports to achieve the desired height)
Wall spacers:
There are 3 basic types that 'lock' the walking surface in place. They also allow a 6mm drainage gap, without becoming a trip or 'high heel' hazard, especially at doorways. This is the only component of the system that provides an Alternative Solution.
We will warranty the System with the 6mm perimeter gap, providing membrane and drainage manufacturers maintenance schedules have been followed correctly.
Maximum Fall under Deck Jak® Tile Support (allowing a level pedestrian surface):
1:30 = approx 35mm/m = 2°
(NOW IN STOCK 200mm diameter base has an in-built fall that will double the fall compensation to 4°.)
Point Load & Shear Testing Results:
- Fins: 1055kg
- Screw Thread: 3298kg
- 330 x 330 ceramic tile on 18mm compressed sheet: 867kg
- Chair leg on corner of ceramic tile on 18mm compressed sheet: 511kg shear
- 300 x 300 concrete paver (green): 596kg
- Chair Leg on 300 x 300 paver (green): 410kg
NOTE: .dwg format or .mcd format available. Please contact us if you cannot download the file from our website.
read more